Plant Support Equipment & Tools

The JET Model J-F Cold Saw is a pendulum bench saw designed for cutting metals. Operation is manual: after turning on the electrical power supply to the machine and clamping the workpiece in the vice, the operator starts the blade by pressing the microswitch located on the control lever; he then moves the head downwards […]

TIG (tungsten inert gas) welding is used to make precise, critical welds when joining metals such as mild steel, aluminum, or stainless steel. TIG welding is a two-handed process (one hand holds the torch while the other feeds filler metal) and commonly involves a foot pedal or fingertip remote to control the arc amperage while […]

The Toyota 3-Wheel Electric Forklift is a multi-use forklift that leads the industry in run time, travel speeds, and lift/lowering speeds. The lifting capacity is 3,000 – 4,000 lbs.

The MicroVision microprocessor-based Boiler Controller has been designed to monitor and control Total Dissolved Solids (TDS) in terms of electrical conductivity measured in micro Siemens per centimeter. A setpoint of the desired conductivity is entered into the controller through the front panel. As this limit is exceeded, a blowdown valve is opened via an onboard […]

The Torchmate 4400 is a powerful fully assembled 4×4 CNC plasma cutting table that was designed to start cutting quickly. It’s a robust machine with high-end components that are built into a small machine footprint. The design goals for this plasma cutting table were to equip our customers with a small CNC machine that had […]

JET mitering horizontal bandsaws unique design features a swiveling head while the base remains stationary. An easy access control panel and heavy-duty geared head transmission for quick speed change allows the stock to remain same position while making accurate crosscuts and miters.

The Millermatic 252 welds longer on high-end applications. The Auto Gun Detect system automatically detects and recalls the voltage, wire feed speed, and timer of the active gun, allowing the operator to simply pull the trigger on the MIG gun, spool gun, or push/pull gun.

The Ridgid pipe threader is used for making threaded connections quickly and easily on pipe from 1/4″ to 4″ in diameter, including mild and stainless steel. IBRL Inventory # 50-006

The Toyota fork lift is capable of lifting 7000lbs and can unload off the IBRL dock, or travel via ramp to ground level to unload.  A smaller 3500lb fork lift is also available. IBRL Inventory # 50-002